security fence anti climb
  • Home
  • 100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate

Oct . 16, 2025 14:35 Back to list

100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate



Hands-on notes: a practical look at the 100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate

There’s a quiet renaissance in small-format garden gates—homeowners want solid hardware, cleaner lines, and coatings that don’t chalk after two summers. The 100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate hits that brief with a familiar Euro look (RAL6005), a 50×50 mm mesh, and a round-post frame that plays nicely with standard Euro-mesh fencing. To be honest, I like the no-drama install the most.

100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate

Industry trends (and why this model is popular)

Three obvious shifts: greener palettes (literally—RAL6005 is the default), pre-finished galvanized + powder-coated steel for longevity, and standardized widths that align with fence modules. In fact, many customers say they’re done with “paint-it-yourself” gates. A gate like the 100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate lands in the sweet spot: efficient, tidy, cost-aware.

Key specifications

ParameterDetail
DimensionsW100 × H150 cm (post center to post center)
Fence height compatibility≈100 cm fence lines (standard Euro-mesh)
Mesh50 × 50 mm square
Frame & postsRound frame with round posts; welded construction
Base metalLow-carbon steel, pre-galvanized
CoatingZinc per EN 10244-2 + polyester powder coat RAL6005
Typical wire Ø≈3.0–4.0 mm (real-world supply may vary by batch)
Service lifeInland ≈10–15 yrs; coastal ≈5–8 yrs unless upgraded
OriginNorth of Houzhuang Village, Anping County, Hengshui, Hebei, China

Process and testing (what actually matters)

Materials are cut, welded, and smoothed; zinc coating is specified to EN 10244-2, then a polyester powder is applied and cured. Adhesion is typically spot-checked via ISO 2409 cross-cut; coating thickness by ISO 2808. For corrosion screening, many vendors run ISO 9227 neutral salt spray (I’ve seen 300–500h on similar builds). Not lab-perfect, but good signals for yard duty.

100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate

Where it fits

  • Home gardens, allotments, and yard side-returns
  • Community gardens, light municipal parks, pet runs
  • School perimeter infills where a modest 1.5 m height suffices

Advantages: quick integration with Euro mesh, minimal maintenance, tidy look in foliage-heavy spaces, and surprisingly smooth swing when hinges are aligned (yes, alignment still matters more than brand).

Vendor comparison (typical market snapshot)

Vendor Type Coating System Certs (typ.) Customization
Anping specialist (this product) EN 10244-2 Zn + polyester RAL6005 ISO 9001 factory (on request); REACH-compliant powders Sizes, RAL colors, locksets, posts
Generic marketplace seller Basic powder; zinc layer varies Limited document set Minimal; fixed kits
Big-box private label Powder over pre-galv, solid QC Consistent paperwork, batch CoCs Limited colors, fixed sizes

Customization

Color swaps (full RAL palette), alternate wire Ø, upgraded hinge/latch kits, extended posts (bolt-down plates vs. in-ground), and mesh variants are regular requests. Lead times fluctuate—ask early if you need “school-term” delivery windows.

100x150cm Green Euro Home Yard Metal Fence Gate Garden Gate

Mini case studies

  • Residential allotments, Leeds: 24 gates installed over two days; zero latch callbacks in first season; customers liked the “disappears into hedges” green.
  • Community dog run, inland Denmark: powder coat held color well after winter; minor scuffs touched up with RAL6005 pen—practically invisible.

Feedback trend: people mention consistent swing and the paint’s resilience. I guess that’s what you actually notice after month three.

Certifications and standards (available or referenced)

Factories in Anping commonly operate under ISO 9001. Coatings are typically tested to ISO 2409/9227 and sized to EN 10244-2 zinc guidance. Color is RAL-classified for repeatability. Documentation varies by batch—ask for data sheets and test reports.

Citations

  1. EN 10244-2: Steel wire and wire products — Non-ferrous metallic coatings on steel wire.
  2. ISO 2409: Paints and varnishes — Cross-cut test for adhesion.
  3. ISO 2808: Paints and varnishes — Determination of film thickness.
  4. ISO 9227: Corrosion tests in artificial atmospheres — Salt spray tests.
  5. RAL 6005 (Moss Green) — RAL Colour Standard.
Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.