1. Start with the buyer's constraints

Before you compare specifications, write down:

• Required fence height for the site, and any local rules that limit it.
• Run length, so you can work out how many panels and posts you need.
• Opening size needs, for example how much you want to see through the fence.
• Finish and colour expectations for the installation environment.
• Privacy needs, which decide whether you need slats.
• Application type, such as a home garden, a park or a commercial site.

These answers point you to the right row in the specification table and to the right accessories.

2. Panel height and number of folds

The published 3D wire fence specification lists these panel heights and fold counts:

The source material says the number of V-shaped curves generally changes with the height of the welded mesh. Taller panels have more folds. For 1.83m, the table lists both 3 and 4 folds, so state which one you need in your enquiry.

3. Panel length

The listed panel length is 2.5m or custom. Measure the fence line and allow for posts. If 2.5m panels do not divide evenly into your runs, ask whether a custom length is possible.

4. Wire diameter

Three wire diameters are listed: 4.0mm, 4.5mm and 5.0mm. The source material does not compare them on strength or service life, so this guide does not rank them. Pick the diameter in your project specification and confirm it on the quotation. Check that the panel height, wire diameter and mesh size you want are offered together.

5. Opening (mesh) size

The listed mesh sizes are **50200mm and 55200mm**. This panel type has excellent visibility. If your site has rules about opening size, compare them with these two options before you order.

6. Material and surface treatment

The product description says the panels are welded from high-quality low-carbon steel wire. It describes them as fully welded and hot-dip galvanized, and it also says they are powder coated over galvanized material. A related product page in the same range lists hot-dipped galvanized, PVC coated and powder coated as surface treatment options for welded wire mesh fence. These descriptions overlap, so confirm in writing:

• the exact surface treatment for your order
• the colour, if the panels are coated
• the surface treatment of the posts

7. Posts and connection

The panel connects to the post with suitable clips. The range offers a 3D curvy welded wire mesh fence panel with square posts.

8. Application fit

The product is presented as a home outdoor decorative garden fence. For the wider 3D curved welded wire mesh fence range, the published description lists railways, airports, schools, factories, residential areas, gardens, parks and stadiums as typical uses. It also describes the design as simple to install, good-looking and an economical version of the panel system.

When this recommendation may not apply:

• Ask about other products instead.
• If you need full privacy, a standard open-mesh panel will not give it. Look at slats (see below).
• If you need to fence a large area quickly with flexible material, a chain link roll may be more practical. The company's Powder Coated Chain Link Wire Mesh Fence is described as typically used to cover larger areas. It is supplied in rolls 9-18m long, depending on roll weight, with wire diameters of 2.8mm to 4.0mm.

9. Optional privacy slats

For buyers who need privacy, the range includes Plastic PVC UV Slats for 3D curved panel welded wire mesh fence. They are also offered pre-combined as a 3D Curved Panel Welded Wire Mesh Garden Fence With Plastic PVC UV Slat. Published slat specifications:

• Width: 44mm, 47mm, 49mm or custom
• Height: 103mm, 123mm, 153mm, 173mm, 193mm or custom
• Colour: RAL 7016, RAL 6005, RAL 7040 or custom
• Temperature: -35℃ to 70℃

Confirm that the slat size matches your chosen panel and mesh opening before you order.

10. Checklist for your enquiry

Send Anping County Shengxin Metal Products Co., Ltd the following:

1. Panel height and fold count
2. Panel length (2.5m or custom)
3. Wire diameter (4.0mm, 4.5mm or 5.0mm)
4. Mesh size (50200mm or 55200mm)
5. Surface treatment and colour
6. Post type, size and clips
7. Whether you need privacy slats
8. Quantity, destination and any documents your market requires

Ask the company to confirm the specifications, any certificates you need, pricing and delivery time for your project. This guide does not commit to any of them. Visit www.metalwire-fence.com for company and product information.