Choosing a 3D Wire Mesh Fence Panel With Square Post: Opening Size, Wire Diameter and Application

What this product is

The product page says a 3D welded wire fence is also called curved welded fencing, triangle mesh fence or welded fence panel. The listing describes it as:

• Made of welded mesh panels with longitudinal profiles (the "folds") that form a rigid fence
• Welded from low carbon steel wire
• Attached to the posts with suitable clips
• "Pretty light yet durable," with a simple structure and easy installation
• "An economical version of the panel system"

These are the supplier's descriptions, not independent test results.

Start with your project requirements

Write down these points before you compare options:

1. Required fence height, which sets the panel height and the number of folds.
2. Opening size that suits what the fence needs to keep in or out.
3. Rigidity and handling needs, which affect your choice of wire diameter.
4. Run length and layout, which decide whether the standard 2.5m panel works or you need a custom length.
5. Exposure and appearance, which guide the surface treatment.
6. Post and clip details for the square-post system. You must confirm these with the supplier because the product page has no post specifications.

Criterion 1: Panel height and number of folds

The listing gives these panel heights, each with a number of folds:

Taller panels have more folds. At 1.83m the listing shows either 3 or 4 folds, so state which one you want in your inquiry. The table on the product page is laid out in a compressed way, so check the height-to-fold pairing for your chosen height with the supplier.

Criterion 2: Opening size

The listed mesh sizes are **50*200mm and 55*200mm**. Both are elongated openings. The difference between them is the narrower dimension (50mm or 55mm). If your project has a required opening size, compare it with these two options. If neither fits, ask the supplier directly. The listing does not offer other opening sizes.

Criterion 3: Wire diameter

The 3d wire mesh fence panel is listed in 4.0mm, 4.5mm and 5.0mm wire. All else being equal, thicker wire means a heavier, stiffer panel. The product page does not link a wire diameter to any load, impact or security rating. Choose the diameter from your own project specification. Don't treat a diameter as a performance guarantee.

Criterion 4: Panel length

The listed panel length is 2.5m or custom. If your post spacing or site layout needs a different length, ask for it as a custom item. Confirm feasibility, tolerances and any other terms in writing.

Criterion 5: Surface treatment

The listing names these surface treatments for welded wire mesh fence:

• Hot-dipped galvanized
• PVC coated
• Powder coated

It also describes panels with powder coating over galvanized material. The page gives no coating thickness, colour range or corrosion test data. If your project specifies these, ask for them directly.

Criterion 6: Posts and connection

This product is named as a system with a square post, and the listing says the panels attach to the posts with suitable clips. The page gives no post section size, wall thickness, post height, clip type or post surface treatment. Get these details confirmed before ordering, especially if you need them for foundation design or installation planning.

Where this product applies, and where it may not

A rigid, light, economical welded panel system with an attractive appearance.

This guide alone is not enough to choose this product if your project needs:

• A height, opening or wire diameter outside the listed options
• A documented security, anti-climb or impact rating
• Specific certifications, coating performance data, prices or delivery dates

The source material covers none of these, so get written confirmation from the supplier.

Related options in the same catalog

The catalog also lists 3D Welded Wire Mesh Metal Fence Panels With Peach Post, whose panels are described with V-shaped beams at the top, centre and bottom edges, and 3D Curved Metal Welded Wire Mesh Fence Garden Fence For Fence Panel. Their listed panel specifications match those of the square-post model. If you are considering another post style, compare the post and connection details with the supplier.

Request checklist

When you contact Anping County Shengxin Metal Products Co., Ltd about welded wire mesh fence panels, include:

• Panel height and number of folds
• Mesh size (50200mm or 55200mm)
• Wire diameter (4.0, 4.5 or 5.0mm)
• Panel length (2.5m or custom)
• Surface treatment
• Square post and clip requirements
• Quantity and destination, for quoting

Visit www.metalwire-fence.com for company and product information. Confirm all specifications and purchasing terms directly with the company.