What the system includes

The Australia temporary fence system is a set of components: fence panels, bases, clamps and other optional accessories. It is described for construction sites, events and private sites, where it is used for protection and sectioning.

The listed parts are:

• Welded mesh panel
• Round tube frames
• Plastic feet
• Clamp
• Stay/support

The panels are free-standing and self-supporting. Clamps interlock neighbouring panels, so the fence line can be set up, moved and reconfigured. Counter-weighted feet support the panels. The product description also mentions accessories such as gates, handrails, feet and bracing, depending on the application.

Start with your buyer requirements

Before comparing options, write down:

1. Application: construction site perimeter, event crowd separation, or private site sectioning.
2. Run length and layout: this sets the number of panels, feet and clamps, and whether you need gates.
3. Required panel height and width: for example, local site rules or the client's project specification.
4. Exposure and duration: how long the fence stays in place and how often it is moved. Ask the supplier how this affects wire and frame choices.
5. Destination market requirements: any standard or test report your project needs must be confirmed with the supplier.

Criterion 1: Opening mesh size

Published opening mesh options are 60×150 mm, 75×75 mm, 75×100 mm and 50×100 mm, with other sizes listed as "etc".

A smaller opening means more wires per panel, which gives a denser screen. A larger opening uses fewer wires. The listing does not include climb-resistance or strength data for any opening size. If your site has a requirement for maximum opening, specify it in your enquiry and confirm it matches one of the listed sizes.

Criterion 2: Wire diameter (wire gauge)

Listed wire gauges are 3.2 mm, 3.5 mm, 4.0 mm and 4.5 mm, or another size on request.

Wire diameter is one of the main inputs to panel weight and material use. Mesh opening and wire diameter should be specified together, because the two together define the welded mesh. Ask the supplier for the panel weight of your chosen combination so you can plan handling and freight. This listing does not give panel weights.

Criterion 3: Frame pipe outer diameter

The round tube frame is 32 mm, 38 mm, 40 mm, 42 mm and 48 mm O.D., among other options. The frame size must also suit the clamps you order, so confirm that clamps and frame pipe match.

Criterion 4: Panel size

Regular panel sizes are 2.1×2.4 m, 1.8×2.4 m and 2.1×2.9 m, with other sizes on request. Make sure your size convention (height × width) is clear in your enquiry so you get the right height. Use the panel width to work out how many panels, feet and clamps your run length needs.

Criterion 5: Plastic feet

Three plastic foot dimensions are listed: 600×220×150 mm, 610×230×150 mm and 570×240×130 mm. The listing does not give foot weight, fill method or ballast requirement. Confirm with the supplier how the feet are weighted for your site conditions.

Criterion 6: Accessories by application

The description names gates, handrails, feet and bracing (stay/support) as accessories chosen to suit the application. For event or exposed sites, ask the supplier which bracing they recommend and how many stays are needed per run. This listing does not define bracing intervals.

Summary of confirmed options

When this product may not fit

• Projects that need a permanent, fixed fence. This is a free-standing temporary system.
• Tenders that require a specific certification, test report, coating weight or wind rating. None of these are in the confirmed material, so they must be confirmed separately before you choose this product.

Checklist for your wholesale temporary fence supplier enquiry

• Application and site type
• Panel size, opening mesh, wire gauge and frame pipe O.D.
• Frame wall thickness and galvanizing details
• Plastic foot type and quantity, plus clamp and stay quantities
• Gates, handrails or other accessories
• Packaging and container loading arrangement
• Any certification or documentation needed for your market

For specifications, packaging and purchasing terms, contact Anping County Shengxin Metal Products Co., Ltd through www.metalwire-fence.com.